How To Use The Cartoning Machine Correctly?

How to use the cartoning machine correctly?

1. Connect the power cord, turn on the power switch on the control panel, and press the emergency stop switch.

2. Turn on the main power of the hot melt gluer, and set the temperature at about 150-180°C. (This step is for hot-melt packaging. If it is not glued and sealed, this step can be omitted.)

3. Connect the air source: the air pressure is adjusted at 0.6-0.8MPa

4. Place the carton: arrange the carton, check whether there is adhesion, and place a pile in the carton bin. The cartons must be stacked in the same direction, face up.

4. After the jog control and other auxiliary button switches, check the box opening, feeding, corners, glue spraying and other components to ensure that these important parts are free of debris and operate normally. If any problems are found, the relevant technical personnel should be notified in time to deal with them. , to continue the operation.

5. When the temperature of the hot melt adhesive machine reaches the set temperature, turn on the "Start" button on the hot melt adhesive machine, and then click the "Start" button on the control panel, and the machine starts to run.

6. After the machine is running. Putting materials on the conveyor belt stops normal packaging consumption.